0€
na mesec
Phased Array Ultrasonic Testing of Dissimilar Metal Welds using Geometric based Referencing Delay Law Technique
Phased Array Ultrasonic Testing of Dissimilar Metal Welds using Geometric based Referencing Delay Law Technique
Številka: 44296784
Partnerska prodaja
Phased array ultrasonic testing (PAUT) techniques are widely used for the non-destructive testing (NDT) of austenitic welds to find defects like cracks. However, the propagation of ultrasound waves through the austenitic material is intricate due to ..
Celoten opis
38,05 €
Partner:
LIBRISTO
Zagotovite si brezplačno dostavo s
Naroči pri partnerju
5.9.2024
predviden osebni prevzem
Več informacij
5.9.2024 -
10.9.2024
predvidena dostava na dom
Artikli partnerja LIBRISTO
Za prodajo odgovarja mimovrste=), vključno z morebitnimi reklamacijami ali vračili artiklov.
Partner pošlje artikle v ločeni pošiljki.
Način in ceno dostave določi partner. Osebni prevzem partnerskih artiklov v mimovrste=) trgovinah ni mogoč.
Številka:
44296784
Predstavitev
Ta knjiga je v tujem jeziku: Angleščina
Lastnosti knjige
Originalni opis knjige
Phased array ultrasonic testing (PAUT) techniques are widely used for the non-destructive testing (NDT) of austenitic welds to find defects like cracks. However, the propagation of ultrasound waves through the austenitic material is intricate due to its inhomogeneous and anisotropic nature. Such a characteristic leads beam path distorted which causes the signal to be misinterpreted. By employing a reference block which was cutout from the mockup of which the structure is a dissimilar metal weld (DMW), a new method of PAUT named as Referencing Delay Law Technique (RDLT) has been introduced. With the RDLT, full matrix capture (FMC) was used for data acquisition. To reconstruct the images, total focusing method (TFM) was used. After the focal laws were calculated, PAUT was then performed. As a result, the flaws are more precisely positioned with significantly increased signal-to-noise ratio (SNR).
Lastnosti knjige
- Jezik: Angleščina
- Založnik: TUDpress Verlag der Wissenschaften GmbH
- Vezava: Knjiga – Brošura
- Število strani: 164
Originalni opis knjige
Phased array ultrasonic testing (PAUT) techniques are widely used for the non-destructive testing (NDT) of austenitic welds to find defects like cracks. However, the propagation of ultrasound waves through the austenitic material is intricate due to its inhomogeneous and anisotropic nature. Such a characteristic leads beam path distorted which causes the signal to be misinterpreted. By employing a reference block which was cutout from the mockup of which the structure is a dissimilar metal weld (DMW), a new method of PAUT named as Referencing Delay Law Technique (RDLT) has been introduced. With the RDLT, full matrix capture (FMC) was used for data acquisition. To reconstruct the images, total focusing method (TFM) was used. After the focal laws were calculated, PAUT was then performed. As a result, the flaws are more precisely positioned with significantly increased signal-to-noise ratio (SNR).